Carlisle Fluid & Peel/Stick Waterproofing

CCW AWP is a single component latex-based primer. CCW AWP is an accessory product to the CCW MiraDRI 860/861 sheet membrane and is designed to set the dust on concrete and block surfaces, to promote adhesion of the CCW waterproofing membrane to the substrate. CCW AWP should be spray applied at a coverage rate of 400 ft. per gallon. Normal drying time will be approximately 30 minutes depending on job site conditions. Upon curing, CCW AWP will not transfer when touched. Surfaces exposed for more than 24 hours must be reprimed as they may collect dust and other contaminants causing adhesion problems. CCW AWP should be applied at temperatures above 40*F (4.4*C).